Repurposed jewelry organizer -from an old window & shelf

How to make a jewelry holder from scrap wood 1

So, It has been awhile my friends.  This is a soft opening of our new and improved website!  This is a feature we like to call Transformation Tuesday.  We don’t feature something every Tuesday but when we do feature something on a Tuesday – it is something that we have transformed and think it’s something special enough that deserves it’s own spotlight and day!  Anyways, We’re calling this a “soft opening” of the website because as expected, we had a few kinks to work out with the new theme.  Unexpectedly and unfortunately, I had about 17 posts ready for you guys and with the transition, all of that content that was located in the draft folders – was lost.  We are still attempting to recover it – but so far, no luck :(  It was really unexpected because we did not change our hosting service as we went from a WordPress theme to another WordPress theme (if you are not a blogger or technical person – you will likely not understand that – but please bear with us just the same.)  So, even though some things are still in the process of being fixed – we encourage you to look around and comment and tell us what you think!  :)  We would love to hear your feedback as Marco has been working very hard from the back end of the blog and I have been working very hard trying to re-create some of the projects I have done and creating new content.   Without further ado – here is the first project on the new site!

In June, while we working on our Bathroom Organziation Project I had come to the decision that I was not happy with the the piece that was storing my jewelry.  It wasn’t my style and was cluttered and not easy to access.  I wasn’t sure exactly what I wanted but I knew I wanted to make something custom.  I’m one of those people that inspiration hits out of nowhere.  Kind of randomly, while in the middle of 189 other projects and I stop mid-tracks saying SQUIRREL when I spot something or inspiration hits and change gears to implement whatever “it” is, even if it’s just to start the project.  So, in the middle of the ceiling installation that we were doing here is what I started.

 

confused

I didn’t want Marco to catch me (he tends to get a little frustrated when my mind goes off on a tangent as he doesn’t understand this way of thinking and he definitely doesn’t understand that I will not remember my inspiration if I don’t drop everything and just do it at that moment – which partially explains the 452 unfinished projects we have) so the pictures may not be the best.  I took a window frame that had no glass and a broken wooden country shelf thingy – you know the kind, front he 1990’s and took it a part and cut it down.  I married the two together using my nail gun and a few screws.  It took all of 20 minutes.  then, it sat…. for 2  months.  In my room, starting at me day in and day out.  Long for me to finish it.  Taunting me.

Renovar design Jewelry organizer phase 1

 

I couldn’t finish any projects while I was recovering from my surgery, without his help. He was so excited to help me he couldn’t stand it!! (To be read as, really? Another project to help you with, because I already created a gallery wall and moved all the furniture for you!!) He enthusiastically reluctantly, YET lovingly, jumped in the car and went to the hardware store to get the wire mesh. We had everything else on hand. I was able to lay out the hooks the way that I wanted and mark them. Unfortunately, I was unable to pre-drill them or screw them in. Hubs did that part for me this time. Next, I painted the whole piece. Which was an easy, sit down project. I also painted the hooks since they didn’t match. I used sand paper and did a light distressing as well over the entire piece.

Renovar design Jewelry organizer phase 2

Next I tried to install the wire mesh but had some pain so hubs had to help & this time he actually was okay with it because he could tell that I was in pain and didn’t want me to get hurt with the mesh. It simply gets stapled on the back-side and then cut to size. Please make sure that you use gloves for safety as the edges are very sharp. Especially when you are cutting it. He started out with wire snips but as he got going, he ended up just using regular scissors because of the length of the sheers – it went a lot faster. This entire project, including paint dry time, took about an hour and a half. The only cost we incurred was approx. $8.00 for the roll of mesh that we had to purchase. We didn’t even use 1/4 of the roll.

Renovar design Jewelry organizer phase 3

I love how I have everything neat and organized and all my jewelry in one place. I do need to find something or make something different to fit my stud earrings. Other than that. I seriously, am totally happy with how it turned out!!

The top basket holds watches. Even though it doesn’t match, I won’t change it since it is a Longaberger basket and is part of a breast cancer awareness series and is over 15 years old. Then the bracelets are on the top hooks. The dangle earrings loop easily onto the mesh. The shelves can be used for anything. Perfume is shown and I actually added my ring holder. I will be using the bottom shelf for the stud earrings and then the bottom hooks have all of my necklaces. I sorted everything by color so that I can easily access all of the jewelry in the morning while dressing for work and keep them neat and organized.

Renovar design Jewelry Organizer Re-Purposed from an old window and old shelf

 

Well, I hope this project inspires you to be creative and to look at “junk” in a whole new way! I would love for you to follow along: InstagramFacebookPinterestTwitterGoogle +

Thanks so much for reading my little blog.  Please feel free to comment.  Also, remember that sharing is caring and is always appreciated!

Until next time,
Jenny

Subscribe-to-blog-button

Linky Party is happening at: DIY Dreamer!

Leave a Reply

Your email address will not be published. Required fields are marked *